ROOF SYSTEM

The Stage Riggers Roof System comes in different sizes. 20’ x 40’, 40’ x 40’, 80’ x 40’, 60’ x 60’, 60’ x 70’, 60’ x 80’, 80’ x 80’, and 80’ x 100’. These are motorized self- climbing system using chain hoist motors with a motor controller for safe and fast setup. The roof skin is made of reinforced PVC tarpaulin. The standard color is white outside and black inside.

TRUSSES

BOX/TRIANGULAR TRUSSES

Supports structure for lights, speakers , or any equipment. Available in different sizes.

CIRCULAR TRUSSES

12′ Diameter truss assembled in four sections.

PROLYFT CHAIN HOIST

Chain hoist motor designed to carry heavy loads such as lighting trusses, speaker hangers, LED screens, etc. Available in 250kg, 500kg,1000kg and 2000kg working load limit.

REVOLVING PLATFORM

The main component of this revolving platform is a 7′ diameter gear driven by a 5HP electric motor with frequency inverter controller and a reduction gear mechanism that revolves at a maximum speed of 1 rpm. It can fitat different platform sizes from 8′ up to 30′ in diameter. In stage plays, it has been used for change of sceneries/sets. It has also been used in fashion shows, launching of new products.

STAGERIG PLATFORM

These stage panels are made of heavy duty square tubular steel with 3/4″ marine plywood topping. Standard sizes are: 4’x8′ , and 4’x4′. The legs are made of sch 40

steel pipes that are independent from the panels so it can be replaced with different heights and stored separately. The legs can also be used with adjustable jackbase for uneven base flooring. Available in Acrylic Finish Flooring and Phenolic Plywo

CONTROL BOOTH

Elevated platform with tent roof available in these sizes: 16’x24′ , 16’x16′ , and 12’x12′.

SCAFFOLDING WITH CONTROL BOOTH

Different sizes of scaffolding frames and pipes are available for backdrops, lighting towers, sound towers, follow spot towers, camera platforms, stage platforms, etc.

The scaffolding are equipped with the proper jack bases and outriggers for safety.

*all are painted black

BARRICADES

CRASH BARRICADES

These barricades are used for the heavy pressure areas such as stage front of rock concerts. The barricades are 4’ high and 4’ wide and are bolted to each other. These are made out of heavy steel gauge and will not topple over.

RAILING BARRICADES

This is a free standing barricade designed for light crowd control. The size is 1.2m (4’) high and 2.4m (8’) long. It is made of heavy duty steel pipes. The outer main frame is 43mm in diameter. The inner vertical frames is 20mm in diameter. The whole barricade is dipped and coated by electro galvanizing to insure rust free protection outside and inside of the pipes. The barricades are made with heavy duty interlocking connection. The legs were also designed so that the barricades can be used at 90 deg. configurations. Its total weight is 30 kilos.

FLYING SYSTEM (Manual and Motorized)

Two kinds of flying systems are available:

(1) The manually controlled system has the capability for vertical and horizontal movements. This was used for events such as “Little Mermaid” and “Peter Pan”. An advantage of the manual system is its ability to control the fast and slow movements.

(2) The motorized system is also capable of vertical and horizontal movements but it has a larger lifting capacity and a longer horizontal range.

LIFTING PLATFORM

This platform is 4’x4’x8’H. It can carry up to 300 kg. This is used for lifting a performer from under a stage to an 8’ stage. The elevating floor is made of steel grating to accommodate special lighting and smoke effects.

UNIVERSAL MOUNT SPOT CHAIR BLEACHERS

This is comfortable and safe, seatbelt provided, made of aluminum T6061-T6

RISERS

These platform bleachers can be set up to 12 rows at 1 foot interval per level. It can accomodate up to 1000 persons. Sizes adjustable upon request.

GRASS MATTING

Used to cover soil or grass during outdoor events such as concerts, weddings, product launches, and

other special events.

STAGERIG DANCE FLOOR

24’x24’ dance floor panels can be rented for indoor and outdoor parties. These are made of polyvinyl floor topping with a 3⁄4” marine ply wood, and rectangular steel tube framing. The panels are interconnected and locked together using a dual butt joint lock mechanism.